S I E R R A SE42G LED Illuminating Bollard
Project Name
 
Address
 
  City
 
  State
 
  ZIP
 

Dimensions           (right click to enlarge and/or print)



Type Model Watt LED Volt

Mounting

Finish Option
  SE42G 9 W - Cool White
WW - Warm White
R - Red
B - Blue
G - Green
A - Amber
2 - 120v
4 - 240v

* Contact factory for availability of 277v driver
39RB -39" Round Bollard

SG - Silver Grey
GG - Graphite Grey
CC - Custom Color

N - None
Ordering Information
Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com

 
Specifications
   
DESCRIPTION Illuminating bollard provides colored accent where contemporary styling and colored accenting is desired.
HOUSING Cylindrical base with horizontal cut at top of shaft is constructed from 0.157” nominal wall, 6061-T6 aluminum tubing. Cylindrical lens is impact-resistant matte acrylic. Lamp and ballast are mounted in the shaft at the bottom of the lens. Lens assembly is secured with stainless steel socket head cap screws inside the base. Fabricated aluminum top cap houses the diffuse aluminum reflector plate and is gasketed to create a weather-tight seal to the lens. Top cap mounts to the lens with two recessed setscrews. All hardware is stainless steel.
OPTICS

Nine high-output LEDs fitted with narrow beam lenses project light upward to evenly illuminate the cylindrical matte acrylic lens. Top mounted reflector element contributes to the uniformity of illumination at the top of the lens.

ELECTRICAL

Universal LED driver is mounted in a weather-proof enclosure at the base of the column. Input voltage to universal driver is 120v through 240v AC, 50/60 Hz. Maximum power consumption is 14 watts. LED driver supplies 350mA to LEDs. Contact factory for availability of 277v driver.

LAMPING
# LEDs    
Available colors

9 high-output LEDs
cool white (5500K), warm white (3300K), red, blue, green, amber


LEDs are included.
MOUNTING

Internal mounting cup mounts to four 1/2" x 17" x 4" hot-dip galvanized anchor bolts embedded in a concrete foundation provided by others. Bollard installs onto mounting cup and is secured with recessed stainless steel setscrews, providing a flangeless appearance. Mounting cup allows horizontal orientation of the bollard independent of the installed bolt pattern.

FINISH

Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.

WARRANTY

Limited product warranty period is three years. LEDs and driver shall carry the respective manufacturer’s limited warranty.

CERTIFICATION Listed for Wet Locations.
Specifications are subject to change without notification
HessAmerica . P.O. Box 28 . Gaffney,SC 29342. Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com
 
Specifications

Specifications are subject to change without notification
HessAmerica . P.O. Box 28 . Gaffney,SC 29342. Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com