HessAmerica Specsheets

S I E R R A SE42G RGB Illuminating Bollard	Project Name
	Address
	City
	State
	ZIP

Dimensions (right click to enlarge and/or print)

Type	Model	Watt	LED	Volt	Mounting	Finish	Option
	SE42G	12	RGB	2 - 120v 4 - 240v * Contact factory for availibility of 277v driver	39RB -39" Round Bollard	SG - Silver Grey GG - Graphite Grey CC - Custom Color	N - None

Ordering Information

Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com

Specifications

DESCRIPTION

Illuminating bollard provides colored accent where contemporary styling is desired.

HOUSING

Cylindrical base with horizontal cut at top of shaft is constructed from 0.157” nominal wall, 6061-T6 aluminum tubing. Cylindrical lens is impact-resistant matte acrylic. Lamp and ballast are mounted in the shaft at the bottom of the lens. Lens assembly is secured with stainless steel socket head cap screws inside the base. Fabricated aluminum top cap houses the diffuse aluminum reflector plate and is gasketed to create a weather-tight seal to the lens. Top cap mounts to the lens with two recessed setscrews. All hardware is stainless steel.

OPTICS

Twelve high-output LEDs fitted with narrow beam lenses project light upward to evenly illuminate the cylindrical matte acrylic lens. Top mounted reflector element contributes to the uniformity of illumination at the top of the lens.

ELECTRICAL

Universal LED driver is mounted in a weather-proof enclosure at the base of the column and operates on 120v through 240v AC input, 50-60 Hz. LED driver supplies 350mA to LEDs. Maximum power consumption is 18 watts. Driver includes dimming control options for pre-programmed color changing sequencing or DMX control capability with optional interface. Contact factory for availability of 277v driver.

LAMPING

# LEDs
Available colors

12 high-power LEDs
RGB

LEDs are included.

MOUNTING

Internal mounting cup mounts to four 1/2" x 17" x 4" hot-dip galvanized anchor bolts embedded in a concrete foundation provided by others. Bollard installs onto mounting cup and is secured with recessed stainless steel setscrews, providing a flangeless appearance. Mounting cup allows horizontal orientation of the bollard independent of the installed bolt pattern.

FINISH

Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.

WARRANTY

Limited product warranty period is three years. LEDs and driver shall carry the respective manufacturer’s limited warranty.

CERTIFICATION

Listed for Wet Locations.

Specifications are subject to change without notification