HessAmerica Specsheets

S I E R R A SE42G Illuminating Bollard	Project Name
	Address
	City
	State
	ZIP

Dimensions (right click to enlarge and/or print)

Type	Model	Watt	Lamp	Volt	Mounting	Finish	Option
	SE42G	35	M - Metal Halide	2-120 7-277	39RB -39" Round Bollard	SG - Silver Grey GG - Graphite Grey CC - Custom Color	N - None

Ordering Information

Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com

Specifications

DESCRIPTION

Illuminating bollard for low-level pathway illumination where contemporary styling is desired.

HOUSING

Cylindrical base with horizontal cut at top of shaft is constructed from 0.157” nominal wall, 6061-T6 aluminum tubing. Cylindrical lens is impact-resistant matte acrylic. Lamp and ballast are mounted in the shaft at the bottom of the lens. Lens assembly is secured with stainless steel socket head cap screws inside the base. Fabricated aluminum top cap houses the diffuse aluminum reflector plate and is gasketed to create a weather-tight seal to the lens. Top cap mounts to the lens with two recessed setscrews. All hardware is stainless steel.

OPTICS

Base down PAR20 lamp with spot distribution projects light upward onto the top mounted reflector plate providing even illumination along the length of the lens.

ELECTRICAL

Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage. Ballast is UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.

LAMPING

Wattage
Source
Lamp
Bulb
Base

35
Ceramic Metal Halide
CDM35/PAR20/M/SP
PAR20
Medium

Lamp is included.

MOUNTING

Internal mounting cup mounts to four 1/2" x 17" x 4" hot-dip galvanized anchor bolts embedded in a concrete foundation provided by others. Bollard installs onto mounting cup and is secured with recessed stainless steel setscrews, providing a flangeless appearance. Mounting cup allows horizontal orientation of the bollard independent of the installed bolt pattern.

FINISH

Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.

WARRANTY

Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer’s limited warranty.

CERTIFICATION

Listed for Wet Locations.

Specifications are subject to change without notification