Wall mounted luminaire for outdoor applications where contemporary styling is desired.
HOUSING
Low profile housing with integral adjustable fitter and hinged doorframe are constructed of cast aluminum. Doorframe is secured with two captive socket head cap screws. Drop lens is clear impact resistant acrylic and sealed to the housing with single piece hollow core “D” profile silicone gasket. Removable reflector assembly allows access to tray mounted ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the luminaire. All hardware is stainless steel.
OPTICS
Horizontal lamp is positioned within the formed aluminum reflector consisting of semi-specular and hammertone anodized aluminum sheet, laser cut for precise reproduction.
ELECTRICAL
Metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast and capacitor are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –40°F (-40°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
175
Metal
Halide
MH175/U/M
ED-17
Medium
150
Ceramic Metal
Halide
MHC150/U/M
ED-17
Medium
150
HPS
C150S55/M
ED-17
Medium
Lamp is included.
MOUNTING
Fabricated steel bracket assembly consists of upper rectangular tubing section with integral luminaire fitter stitch-welded to the lower truss plate. Bracket mounts to surface in four places.
FINISH
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back