Contemporary LED bollard provides asymmetric light distribution pattern suitable for pathways and sidewalks.
HOUSING
Cast aluminum luminaire head houses the LED light engine and driver.Curved rectangular profile bollard shaft is fabricated from aluminum with nominal wall thickness is 0.157". Cross-section of shaft is 7.1" x 3.1". Horizontal clear polycarbonate lens is retained with four stainless steel screws and sealed to the housing with silicone gasketing. All hardware is stainless steel.
OPTICS
LED light engine consists of 1-watt LEDs fitted with prismatic lens optics to produce an asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits no light above 90 degrees and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. Color temperature is 5600K.
ELECTRICAL
Integral LED driver is housed in luminaire head and consumes 10 watts at 350 mA. Input voltage range is 120v AC, 50-60 Hz. LED driver shall be UL recognized.
LAMPING
Wattage
Source
Color Temperature
Other
1-watt LEDs. Maximum power consumption: 10 watts
LED
5600K
Includes prismatic lens optics
LEDs included.
MOUNTING
Flangeless mounting is standard. Optional external flange mounting available on request. Consult factory for mounting details.
FINISH
Bollard is finished in finely textured paint. Standard finishes are matte silver gray metallic or graphite grey. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and driver shall carry the manufacturer’s limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back