Illuminating bollard for low-level pathway illumination where contemporary styling is desired.
HOUSING
Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weather-tight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to 4” tall bollard shaft with three concealed socket head cap screws. All hardware is stainless steel.
OPTICS
Lamp is positioned within the matte acrylic cylindrical lens providing diffuse symmetrical distribution. Diffused end lens provides subtle radiant glow.
ELECTRICAL
Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97%. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -22°F (-30°C) at nominal line voltage. Ballast is UL and CSA recognized. Electronic ballast is UL and cUL listed. G8.5 porcelain socket is 750v 2A, 2.5kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
20
Ceramic Metal Halide
CMH20/TC/U/G8.5
T4.5
Bipin G8.5
Lamp is included.
MOUNTING
Bollard mounts to concrete foundation (by others) with three 3/8" x 8" x 1.5" anchors. See pole data sheet for mounting details.
FINISH
Standard luminaire finish
is satin anodized aluminum. Standard finish for bollard shaft is finely texturedmatte silver grey. Special colors available upon request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall
carry the manufacturer’s limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back