HessAmerica Specsheets

T R E N T O 5 0 0 HID Illuminating Bollard	Project Name
	Address
	City
	State
	ZIP

Dimensions (right click to enlarge and/or print)

Type	Model	Watt	Lamp	Volt	Mounting	Finish	Option
	TR500	20	M - Metal Halide	2 –120 7 - 277	D – Bollard	SG– Silver Grey CC - Custom Color	N - None

Ordering Information

Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com

Specifications

DESCRIPTION

Illuminating bollard for low-level pathway illumination where contemporary styling is desired.

HOUSING

Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weather-tight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to bollard shaft with three concealed socket head cap screws. All hardware is stainless steel.

OPTICS

Lamp is positioned within the matte acrylic cylindrical lens providing diffuse symmetrical distribution. Diffused end lens provides subtle radiant glow.

ELECTRICAL

Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97%. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -22°F (-30°C) at nominal line voltage. Ballast is UL and CSA recognized. Electronic ballast is UL and cUL listed. G8.5 porcelain socket is 750v 2A, 2.5kV pulse rated.

LAMPING

Wattage
Source
Lamp
Bulb
Base

20
Ceramic Metal Halide
CMH20/TC/U/G8.5
T4.5
Bipin G8.5

Lamp is included.

MOUNTING

Bollard mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of four ½” x 17” x 3” hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).

FINISH

Standard luminaire finish is satin anodized aluminum. Standard finish for bollard shaft is finely texturedmatte silver grey. Special colors available upon request.

WARRANTY

Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer’s limited warranty.

CERTIFICATION

Listed for Wet Locations.

Specifications are subject to change without notification