Pole mounted
luminaire for outdoor applications where contemporary styling is desired.
HOUSING
Cylindrical post
top luminaire consists of base with shade supported by four stainless
steel support rods. Heavy-duty cast aluminum base with integral slipfitter
anchors the support rods, and is machined to include groove for gasketing
and mounting surface for the lens and ballast enclosure. Shade shall
be spun aluminum and free from burrs and sharp edges. Shade and base
are gasketed to provide a weather-tight seal to the clear acrylic
cylindrical lens. Luminaire slipfits 3" O.D. pole or tenon, and
has built-in stop to limit insertion depth to 3". Two offset
rows of three 10mm recessed setscrews secure the luminaire to the
pole. All hardware is stainless steel.
OPTICS
Vertical base
down lamp is positioned within the clear cylindrical acrylic lens.
Underside of shade is painted white. Optional internal louvers are
available for symmetric and asymmetric distributions to provide brightness
control.
ELECTRICAL
Electrical components are mounted in a conical spun aluminum enclosure at the base of the luminaire. Enclosure is painted white. Optional quick disconnect for tool-less replacement of ballast pod available on request.
Ceramic metal halide core and coil ballast with class "H"
(180°C) insulation system shall have a minimum high power factor
rating of 90% and nominal ballast factor of 1.0. Ballast and starter
combination shall be capable of reliable starting to -20°F (-30°C)
at nominal line voltage of ±10%. Ballast, capacitor, and
starter are UL and CSA recognized. Medium base porcelain socket
is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class "H"
(180°C) insulation system shall have a minimum high power factor
rating of 90% and nominal ballast factor of 1.0. Ballast and starter
combination shall be capable of reliable starting to -40°F (-40°C)
at nominal line voltage of ±10%. Ballast, capacitor, and
starter are UL and CSA recognized. Medium base porcelain socket
is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
150
Metal Halide
MHC150/C/U/M/4K
ED-17
Medium
100
Metal Halide
MH100/C/U/M/4K
ED-17
Medium
150
High Pressure Sodium
C150S55/D/M
ED-17
Medium
100
High Pressure Sodium
C100S54/D/M
ED-17
Medium
Lamp is included.
POLE
Trellis pole
is fabricated with alternating vertical 1.1" diameter steel tubes
and 0.4" diameter steel rods, rigidly welded to the perimeters
of alternating 0.4" and 2" high horizontal rings, creating
an open structure at the upper portion of the pole. Vertical structure
encircles the main shaft located at the base of the pole with a section
of one rod removed to allow access to the handhole. Flush mounted
handhole cover is plasma cut with kerf not to exceed 1/8" and
includes triangular tamper-resistant locking device. Single steel
tube extends from the main pole shaft to the bottom of the tenon,
serving as a conduit for power. Pole is hot-dip galvanized with coating
inside and out, then lightly sanded prior to painting. Nominal pole
height is 10' with 3" O.D. tenon. Pole mounts to factory-supplied
hot-dip galvanized soil insert with stainless steel socket head bolts.
See pole data sheet for mounting details.
FINISH
Housing is cleaned
ultrasonically prior to painting. Standard finish is finely textured
matte silver grey metallic or black. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back