Pole mounted
luminaire is available in single or twin mounted configurations for
outdoor applications where contemporary styling is desired.
HOUSING
Cylindrical post
top luminaire consists of base with shade supported by four stainless
steel support rods. Heavy-duty cast aluminum base with integral slipfitter
anchors the support rods, and is machined to include groove for gasketing
and mounting surface for the lens and ballast enclosure. Shade shall
be spun aluminum and free from burrs and sharp edges. Shade and base
are gasketed to provide a weather-tight seal to the clear acrylic
cylindrical lens. Luminaire slipfits 3" O.D. pole or tenon, and
has built-in stop to limit insertion depth to 3.5". Two offset
rows of three 10mm recessed setscrews secure the luminaire to the
pole. All hardware is stainless steel.
OPTICS
Vertical base
down lamp is positioned within the clear cylindrical acrylic lens.
Underside of shade is painted white. Optional internal louvers are
available for symmetric and asymmetric distributions to provide brightness
control.
ELECTRICAL
Electrical components are mounted in a conical spun aluminum enclosure at the base of the luminaire. Enclosure is painted white. Optional quick disconnect for tool-less replacement of electrical enclosure available on request.
Metal halide core and coil ballast with class "H" (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage of ±10%. Ballast and capacitor are UL and CSA recognized. Mogul base porcelain socket for 200w pulse start metal halide is 1500w-600v, 4kV pulse rated. Medium base porcelain socket for 150 ceramic metal halide is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class "H"
(180°C) insulation system shall have a minimum high power factor
rating of 90% and nominal ballast factor of 1.0. Ballast and starter
combination shall be capable of reliable starting to -40°F (-40°C)
at nominal line voltage of ±10%. Ballast, capacitor, and
starter are UL and CSA recognized. Mogul base porcelain socket is
1500w-600v, 4kV pulse rated. Medium base porcelain socket is 660w-600v,
4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
200
Pulse Start Metal Halide
MS200/C/V/PS/737
ED-28
Mogul
150
Ceramic Metal Halide
MHC150/C/U/M
ED-17
Medium
250
High Pressure Sodium
C250S50
ED-18
Mogul
150
High Pressure Sodium
C150S55/D/M
ED-17
Medium
Lamp is included.
POLE
Stepped steel
pole is manufactured from cold drawn seamless mechanical tubing with
nominal wall thickness of 0.126". Flush mounted handhole cover
is plasma cut with kerf not to exceed 1/8" and includes triangular
tamper-resistant locking device. Pole is hot-dip galvanized with coating
inside and out, then lightly sanded prior to painting. Base cover
is one-piece 0.080" spun aluminum and finished to match the pole.
Specify 10', 12', or 14' nominal pole height. See pole data sheet
for mounting details.
Contact factory for stepped aluminum pole option.
Twin mount bracket assembly is fabricated from steel, then hot-dip
galvanized. Slipfitter has inner steel sleeve which acts a stop
to limit insertion depth to 7.8". Assembly slipfits 3.25"
O.D. pole and is secured with two rows of four 10mm stainless steel
setscrews. Twin pairs of parallel square steel tubing are welded
to connect the slipfitter to the individual tenons for fixture mounting.
Bracket assembly ships prewired with fishtape.
FINISH
Housing is cleaned
ultrasonically prior to painting. Standard finish is finely textured
matte silver grey metallic or black. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back