Pole mounted
luminaire for outdoor applications where contemporary styling is desired.
HOUSING
Cylindrical post
top luminaire consists of base with shade supported by four stainless
steel support rods. Heavy-duty cast aluminum base with integral slipfitter
anchors the support rods, and is machined to include groove for gasketing
and mounting surface for the lens and ballast enclosure. Shade shall
be spun aluminum and free from burrs and sharp edges. Shade and base
are gasketed to provide a weather-tight seal to the clear acrylic
cylindrical lens. Luminaire slipfits 3" O.D. pole or tenon, and
has built-in stop to limit insertion depth to 3.5". Two offset
rows of three 10mm recessed setscrews secure the luminaire to the
pole. All hardware is stainless steel.
OPTICS
Vertical base
down lamp is positioned within the clear cylindrical acrylic lens.
Underside of shade is painted white. Optional internal louvers are
available for symmetric and asymmetric distributions to provide brightness
control.
ELECTRICAL
Electrical components are mounted in a conical spun aluminum enclosure at the base of the luminaire. Enclosure is painted white. Optional quick disconnect for tool-less replacement of ballast pod available on request.
Metal halide core and coil ballast with class "H" (180°C)
insulation system shall have a minimum high power factor rating
of 90% and nominal ballast factor of 1.0. Ballast shall be capable
of reliable starting to -20°F (-30°C) at nominal line voltage
of ±10%. Ballast and capacitor are UL and CSA recognized.
Mogul base porcelain socket is 1500w-600v, 4kV pulse rated. Medium
base porcelain socket is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class "H"
(180°C) insulation system shall have a minimum high power factor
rating of 90% and nominal ballast factor of 1.0. Ballast and starter
combination shall be capable of reliable starting to -40°F (-40°C)
at nominal line voltage of ±10%. Ballast, capacitor, and
starter are UL and CSA recognized. Mogul base porcelain socket is
1500w-600v, 4kV pulse rated. Medium base porcelain socket for is
660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
250
Metal Halide
MH250/C/U
ED-28
Mogul
175
Metal Halide
MH175/C/U/M
ED-17
Medium
250
High Pressure Sodium
C250S50
ED-18
Mogul
150
High Pressure Sodium
C150S55/D/M
ED-17
Medium
Lamp is included.
POLE
Trellis pole is fabricated with alternating vertical 1.1"
diameter steel tubes and 0.4" diameter steel rods, rigidly
welded to the perimeters of alternating 0.4" and 2" high
horizontal rings, creating an open structure at the upper portion
of the pole. Vertical structure encircles the main shaft located
at the base of the pole with a section of one rod removed to allow
access to the handhole. Flush mounted handhole cover is plasma cut
with kerf not to exceed 1/8" and includes triangular tamper-resistant
locking device. Pole key is included. Single steel tube extends
from the main pole shaft to the bottom of the tenon, serving as
a conduit for power. Pole is hot-dip galvanized with coating inside
and out, then lightly sanded prior to painting. Nominal pole height
is 10' with 3" O.D. tenon. Pole mounts to factory-supplied
hot-dip galvanized soil insert with stainless steel socket head
bolts. See pole data sheet for mounting details.
FINISH
Housing is cleaned
ultrasonically prior to painting. Standard finish is finely textured
matte silver grey metallic or black. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back