Cylindrical housing is machined from 6060 extruded aluminum alloy tubing. Upper and lower lens rings are precision machined from 6060 aluminum and sealed to the housing with one-piece diecut closed cell silicone gaskets. Upper and lower tempered glass lenses are sealed to the lens rings with one-piece closed cell silicone gasket. Luminaire with cast aluminum bracket mounts to wall surface with factory-supplied wall anchors and hardware. All hardware is stainless steel.

Upper and lower T6 metal halide lamps provide symmetrical flood distribution.

Ceramic metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 porcelain socket is 660w-600v, 5kV pulse rated.

Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.