Cylindrical housing is machined from 6060 extruded aluminum alloy tubing. Semi-cylindrical front lens fits flush to the housing. Matte acrylic lens is sealed to the housing with one-piece closed cell silicone gasket and secured with six captive flathead countersunk screws. Upper and lower lens rings are precision machined from 6060 aluminum and sealed to the housing with one-piece diecut closed cell silicone gaskets. Upper and lower tempered glass lenses are sealed to the lens rings with one-piece closed cell silicone gasket. Luminaire with cast aluminum bracket mounts to wall surface with factory-supplied wall anchors and hardware. All hardware is stainless steel.

Vertical compact fluorescent lamp provides soft diffused illumination through front lens. Upper and lower PAR30 halogen lamps provide symmetrical flood distribution.

Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage and frequency of ±10%. Ballast shall be UL and CSA recognized. Lamp socket is 75w-600v rated.

Halogen PAR30 lamps are available in 120 volts only. Line voltage halogen medium base porcelain socket with nickel-plated spring loaded center contact is 4A/250V, 5kV pulse rated.

Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.